Dave's Solar Project

esp32 Chip ID: 30:ae:a4:21:c7:94
Running: 20210508.01
compiled @ 1620503603, 2021/05/08 19:53:23
Posting between: 02m54 & 03m54 each hour
Checking version between 35m46 & 45m46 of hour: 23
startupTimeLocal: 2021/05/17 00:02:50
nowTimeLocal: 2021/05/17 05:02:55
Time Zone: Indochina Standard Time, ICST
UTC Time: 2021/05/16 22:02:55
Online for: 5h, 5s
SPIFFS: 209.08KB used
84.5% of 1.31MB free
Heap: 235.87KB free
WiFi Info: ID:"555_Guest" IP: RSSI: -53 dBm
Bonjour Address is: mysky_94.local
last WiFi @: 2021/05/17 05:02:50
next WiFi @: 2021/05/17 05:04:50
Web Connection Info:
:) A0,0,0,0,0,0,0,0,0,0,0,0, P0,0,0,0,0,0,0,0,0,0,0,0,
:( A0,0,0,0,0,0,0,0,0,0,0,0, P0,0,0,0,0,0,0,0,0,0,0,0,
Sample Panel: 0.050W, Target panel: 1000.00
Conversion multiplier: 20000

For every 1000 watts of solar panels you have installed, you would have produced:

Today: -1.000 W-h (0 kW-h)

Yesterday: -1.000 W-h (0 kW-h)

Month # 05 in 2021:
5800 (5.80 kW-h)
Gathered over 13 days, averaging
400 W-h per day

Current segment: 60 and current avgSolarPinData: 0.00

Graphs will become available when the device has collected enough data. File not available: /20210517.svg File not available: /202105.svg File not available: /202104.svg File not available: /2021.svg

Toggle the LED On Off

Toggle the TOGGLEACTUALLYDELETE true false

days to preserve:
Do File Cleanup
<- HTML<- NoHTML<- Reverse
Send File List

post filename to server (if blank, I'll do today's .csv file

Adjust the number of seconds between WiFi reconnections

Adjust the number of seconds between NTP server reconnections (default is about 30 minutes)

Set a new WiFi ssid and password if desired
Input a new WiFi network
Input the WiFi SSID: Input the WiFi Password (if required):
Set the Time using Local time zone
Choose time zone: UTC-10, 9, 8, 7, 6, 5, 4, 3.5 from UTC eg. PST = UTC - 8, so enter '-8'):
Year (2018 or later):
Month (1 to 12):
Day (1 to 31):
Hour (0 to 24):
Minute (0 to 60):
Current update settings:
host1 is: www.offgridify.com
Directory is: /esp32/update/
And filename is: firmware.bin
Change the OTA Update target file here
Input new OTA targets:
Update From Server
LDRPin is default: 35 solarPin is default: 32
Select PIN for the Light Dependent Resistor (Daylight Sensor):
Select Pin for the Solar Panel:
Refresh graph of yyyymmdd or yyyymm csv file. If nothing is submitted I'll refresh today AND this month
Enter month to be tallied into WH (/yyyymm.csv):
Enter month to be updated (/yyyymm.csv):
Enter year to be updated (yyyy):
workingFileDate is: 20210517
Send Working File Contents
Standard time zone offset from UTC is set for: +7.00 hours
Current timeZoneFromUser is: 7
Daylight Savings Time will activate automatically, choose standard time zone: UTC-10, 9, 8, 7, 6, 5, 4, 3.5 from UTC eg. PST = UTC - 8, so enter '-8'):
Select file to upload:

Download a file from the FTP server: (include leading / and trailing file extension)
Read contents of specific file from file system: (include leading / and trailing file extension)
Remove specific file from file system: (include leading / and trailing file extension)
CAUTION: Format the filesystem and Reboot
Select this to format SPIFFS and Reboot
or just reboot
Select this to Reboot
Current solarPanelType setting is: '0' with a loading resistor of 120.00 ohms.

Adjust the type of solar panel

Solar Panel: 12
Submit a daily filename to the monthly file
Input filename to send to 'summarizeDailyCSVFileInMonthlyCSVFiles':
Input file to send, if blank, I will generate the text of this web page.
Use radio buttons to select eMail or FTP